September 3, 2016

PLS-LE200


  • - Easily installed pole and post top version requiring just the connection of power to enable full power line control and monitoring of energy and lamp status
  • - Available in 50W(5500 lm), 100W(11000 lm) and 150W(15600 lm) versions with energy efficient 110 lumen/watt CREE led module
  • - Built in high efficiency 150W LED driver  with 10-100% dimming capabilities and a working life of > 50K hours
  • - Built in ANSI C136.41 ports for use with plug in application modules for environmental monitoring, motion detection and security scanning

Specifications

Power Line Network:

  • - OFDM based 40kbps IPV6 mesh network
  • - 98.4—121.9KHz CENELEC B Band
  • - NIST standard 256-bit ECC encryption
  • - 3 mile range between nodes in ROBO mode
  • - Auto installation of any nodes with proper authentication credentials
  • - Auto healing network with real time network monitoring

LED:

  • - CREE CXA / CXB LED modules
  • - High efficiency 110 to 125 lm/W, CRI >=80
  • - Customizable color temperature (3000K warm white standard)
  • - 120 degree beam angle with optics optimized for the CREE module

 

LED Driver:

  • - CREE LMD series constant current drivers
  • - 100-277Vac input, 0.95 PF, >= 85% efficiency
  • - 10% —100% dimming range
  • - 50,000 hours minimum operating hours
  • - All applicable regulatory certifications

 

Information & Diagnostics:

  • - Utility grade metering of active power, line voltage and current draw
  • - Monitoring of LED status including lumen depreciation and automated notifications of failures
  • - Built in real time clock for default on/off and dimming schedule in case of loss in communications
  • - Bluetooth Smart radio for transmission of diagnostics and other service announcements to authorized smart phones and tablets in the vicinity
  • - Fully integrated with PLS central control software for module installation, control and  monitoring with options for scheduled dimming, demand response (load shedding )control

Power:

  • - 100 to 277VAC universal input, 55 to 155VA power consumption based on LED output wattage
  • - 1 meter, 3 Wire 18GA, power cable is provided for utility hookup. 3.75KVAC isolation to EN55022 Class B 
  • - ANSI C136.37 surge requirements compliant—fully protected against brownouts and transients

Mechanical:

  • - IP65 rated Anodized Aluminum finned body
  • - 800 x 350 x 120mm,  12Kgs, 60mm ID pole mount
  • - -30 to 50˚c operating temperature range